IOSH Approved Racking Inspection Training

Do you get your racking checked regularly?  Do you know why you should?

Warehousing and storage: A guide to health and safety Page 115 of 155 Health and Safety Executive Racking inspection and maintenance
641 In general, racking is manufactured from relatively lightweight materials and, as a consequence, there is a limit to the amount of abuse that it can withstand. The skill of lift truck operators has a great bearing on the amount of damage likely to be caused. Any damage to racking will reduce its load carrying capacity. The greater the damage the less its strength will be.
642 To ensure that a racking installation continues to be serviceable and safe, the storage equipment should be inspected on a regular basis. The frequency of inspections depends on a variety of factors that are particular to the site concerned and should be determined by a nominated ‘person responsible for racking safety’ (PRRS) to suit the operating conditions of the warehouse. This will take into account the frequency and method of operation together with the dimensions of the warehouse, the equipment used and personnel involved, all of which could damage the structure. The inspection follows a hierarchical approach using several levels of inspection.

Immediate reporting
643 As soon as a safety problem or damage is observed by any employee, it should immediately be reported to the PRRS. You should have systems in place for reporting damage and defects.
644 Employees should receive training, information and instruction on the safe operation of the racking system, including the parts affecting their safety and the safety of others.

Visual inspections
645 The PRRS should ensure that inspections are made at weekly or other regular intervals based on risk assessment. A formal written record should be maintained.

‘Expert’ inspections
646 A technically competent person should carry out inspections at intervals of not more than 12 months. A written report should be submitted to the PRRS with observations and proposals for any action necessary.
647 A technically competent person might be a trained specialist within an organisation, a specialist from the rack supplier, or an independent qualified rack inspector.

The Racking Inspection Training is an IOSH approved one-day course for up to 6 people.
These courses are only approved to run from our centre due to the specific requirements of the Practical exam.

Course covers:

• The need to train
• HASAWA, PUWER, HSE, HSG76
• Identify main components
• Location and purpose of components
• Visual and physical checks
• Risk Assessment procedures
• Use of Inspections Aids
• Recording of findings
• Fault reporting procedure
• Final Assessment

Candidates who successfully pass the training will receive an IOSH certificate  which we recommend is refreshed every 3 years.

Click here for our Training Update to check course dates and availability.
To book, please call 01698 230 200 or email info@dgctraining.co.uk.